Elastomer Flex-Tube / "Hose" dampeners for Sludge, Slurry, & Liquids with Suspended Solids
DIMENSIONS AND CONNECTIONS
Standard Raised Face or Extra strong ends for large pipe moments or In Food & Drug polished trim.
 |
|||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||
 |
 |
 |
|||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
| **ss may be replaced with: A20 for Alloy 20, TIT for Titanium 2, H22 or HC276 for Hastelloy, Tan for Tantalum, etc. |
B=BSP//, N=NPT, M=MALE, F=FEMALE, W=37 DEGREES WELD BEVEL, INCH THREAD SIZES ARE UNC, on=PCD, #=ANSI B16.5 |
D.P. @200F PSI & D.P. @93C Bar - Using an MDMT of -20 and a low working stress to prevent high cyclic duty, fatigue failure. |
Dinension Specifications L in, D in, lbs, Without Fittings - Excludes elbows, flanges, unions, weld-preps, etc. |
No flow reversal in and out of a single connection ensures maximum performance. |
| Price One Piece - Call for quantity discount. |
Connections To Pump & To System - Improved flow smoothing, pressure pulse interception, and more flushability. |
 |
 |
||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
| **ss may be replaced with: A20 for Alloy 20, TIT for Titanium 2, H22 or HC276 for Hastelloy, Tan for Tantalum, etc. |
B=BSP//, N=NPT, M=MALE, F=FEMALE, W=37 DEGREES WELD BEVEL, INCH THREAD SIZES ARE UNC, on=PCD, #=ANSI B16.5 |
D.P. @200F PSI & D.P. @93C Bar - Using an MDMT of -20 and a low working stress to prevent high cyclic duty, fatigue failure. |
Dinension Specifications L in, D in, lbs, Without Fittings - Excludes elbows, flanges, unions, weld-preps, etc. |
No flow reversal in and out of a single connection ensures maximum performance. |
| Price One Piece - Call for quantity discount. |
Connections To Pump & To System - Improved flow smoothing, pressure pulse interception, and more flushability. |
 |
 |
|||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
| **ss may be replaced with: A20 for Alloy 20, TIT for Titanium 2, H22 or HC276 for Hastelloy, Tan for Tantalum, etc. |
B=BSP//, N=NPT, M=MALE, F=FEMALE, W=37 DEGREES WELD BEVEL, INCH THREAD SIZES ARE UNC, on=PCD, #=ANSI B16.5 |
D.P. @200F PSI & D.P. @93C Bar - Using an MDMT of -20 and a low working stress to prevent high cyclic duty, fatigue failure. |
Dinension Specifications L in, D in, lbs, Without Fittings - Excludes elbows, flanges, unions, weld-preps, etc. |
No flow reversal in and out of a single connection ensures maximum performance. |
| Price One Piece - Call for quantity discount. |
Connections To Pump & To System - Improved flow smoothing, pressure pulse interception, and more flushability. |
- PuG
For Suction with PermaCushion, no Air charge required. Liquids containing grit, sand & relatively large solid objects. Use in suction & Low/High pressure discharge.
For Pipe Sizes: 0.75" through 14"
DIMENSIONS, WEIGHTS & CROSS SECTIONAL VIEW
INSTALLATION
APPLICATION STORIES
PuG "Clear-Flo"
PuG/RF
PuG/L-RF
PuG/XL-RF
PuG MAINTENANCE
The PUMPGUARD DIFFERENCE
Click here to return to the Flow Through Pulsation Dampeners - Guarding Against Pulsation Main Page